On this page
To charter a tanker, you send a broker the cargo, the load and discharge ports, the laycan and the terms you want; the broker canvasses suitable ships, negotiates an offer into firm main terms, and the ship is fixed once the remaining conditions ("subjects") are lifted and a recap is agreed. A prompt spot fixture can be done within a day; what you send at the start decides how fast and how cleanly it goes.
This guide follows a voyage charter, the most common way to move a crude or product cargo. Time charters and COAs follow the same steps with different main terms; see voyage charter vs time charter vs COA if you have not chosen yet.
Step 1: what should the order contain?
The order is the brief the broker takes to the market. A complete one gets firm offers; a vague one gets indications that change when the details arrive.
- Cargo: the grade, the quantity and the tolerance (for example "more or less 5%, in owner's option"), and anything special: heating for heavy grades, coating for clean products, segregations for more than one grade.
- Ports: load and discharge ports or ranges, with any terminal restrictions you know of (length, draft, displacement, manifold, berthing hours).
- Laycan: the window in which the ship must arrive and tender notice of readiness, matched to the terminal's programme.
- Terms: your charter party form and rider clauses, the laytime you expect and the demurrage basis.
- Ship requirements: age limit, the oil major or terminal approvals you need, inert gas and vapour return where required.
- Counterparties: the legal names of the charterer, shipper and receiver, so that compliance screening can run before an offer is made.
Step 2: how does the broker find the ship?
The broker checks which ships will be open in your area around your laycan, which owners trade there and which ships have the approvals you need. Depending on your instructions, the order goes to the market widely or is worked privately with a few owners. Owners reply with ships and indications. The broker filters them on position, approvals, sanctions exposure, performance history and terminal fit, and shows you a shortlist with each freight idea converted to a time-charter equivalent, so a cheaper-looking ship that will wait longer does not win by mistake. You can run your own first estimate in the freight calculator.
Step 3: how do offers and counter-offers work?
Once you choose a ship, one side makes a firm offer: a full set of main terms with a deadline for reply. The other side accepts, declines or counters. Main terms usually cover the ship, laycan, cargo and quantity, load and discharge, freight, laytime and demurrage, commissions, the charter party form and the subjects. A firm offer accepted within its time is binding apart from the subjects, so do not make or accept one you are not ready to perform.
Step 4: what are subjects, and who lifts them?
Subjects protect either side while checks are finished. Typical charterer's subjects are ship approval (vetting, often based on the ship's inspection reports in OCIMF's SIRE programme), terminal or receiver acceptance and management approval. Owners may keep subjects on the charterer's details or on their own approvals. Each subject has a deadline; when all are lifted, the ship is fixed. Ask for realistic deadlines: a subject that expires at night in the terminal's time zone helps nobody.
Step 5: what goes into the recap and the charter party?
The broker sends the recap, a summary of everything agreed, and then drafts the charter party on the agreed form with its riders. Read the recap the day it arrives: it is the reference if the voyage goes wrong. Our guide to tanker charter party forms explains how Asbatankvoy, Shellvoy and other forms differ.
Step 6: what happens during the voyage?
You issue voyage orders; agents are appointed at both ends. On arrival the master tenders notice of readiness, and laytime starts as the charter party says. The agents' statement of facts records every event in port, and on discharge the owner's pumping warranty applies. Black Sea voyages add the Turkish Straits: transit waiting, daylight rules for large tankers and dues, all of which should already be in the estimate.
Step 7: how are demurrage and claims settled?
After discharge, laytime is calculated from the statement of facts, and demurrage is claimed with its documents within the charter party's time bar. A good broker collects the documents during the voyage, not afterwards. Our laytime and demurrage guide shows a worked example.
Where do tanker fixtures usually go wrong?
- A laycan the terminal cannot meet. Check the loading programme before you fix, not after.
- Unclear quantity terms. Disputes about short loading start with a vague tolerance.
- Late ship approval. Ask which approvals you need at the order stage, not when the subject is about to expire.
- Compliance documents arriving late. Origin papers and price-cap attestations should be ready before you commit to a ship.
- Straits and canal time not priced. On a Black Sea voyage, waiting at the Bosphorus can change which ship is really cheapest.
- Missed time bars. A demurrage claim without its documents in time is lost.
Ready to fix?
Send the cargo, ports, laycan and terms. A broker replies within 60 minutes during business hours with ships, a freight idea and the assumptions behind it.
This page explains how chartering works in practice. It is not legal advice; the charter party, the current regulations and the terminal's own rules govern any specific fixture.
